메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
저널정보
대한건축학회 대한건축학회 논문집 - 계획계 대한건축학회논문집 - 계획계 제20권 제10호
발행연도
2004.10
수록면
255 - 261 (7page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
This study aims to solve the problem of noise and vibration transmitted to adjacent room especially to the downstairs when using SMT(Surface Mount Technology) equipments To achieve this, a kind of system for preventing noise and vibration was applied, and the effects of sound insulation performance for those alternatives were tested and analyzed
To reduce floor impact noise, floating floor system using a plastic pallet and rubber was applied The applied plastic pallet is the size of 30cm wide × 60cm deep × 6cm high and designed to array on a concrete slab, above this plastic pallet, a 14-cm thick concrete was constructed After installation of this system the floor impact sound was reduced about 7dB(A) For more reduction, a ceiling with a 5-cm thick glass wool and twofold of 0.9-cm thick plywood was constructed at the directly below downstais According to this, 4dB(A) was additionally reduced Based on these results, the design guidelines were suggested to reduce the impact noise generated by using SMT equipment

목차

Abstract

1. 서론

2. SMT장비와 바닥충격음 특성에 대한 이론고찰

3. 평가 대상 현황 및 소음진동 특성

4. 저감 방안 구조의 성능 평가

5. 결론

참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2009-540-014346836