메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김태수 (한밭대학교) 김민성 (한밭대학교) 정하영 (한밭대학교) 김승훈 (한밭대학교) 이용택 (한밭대학교)
저널정보
대한건축학회 대한건축학회 논문집 - 구조계 大韓建築學會論文集 構造系 第26卷 第4號
발행연도
2010.4
수록면
31 - 38 (8page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (22)

초록· 키워드

오류제보하기
Experimental studies of thin-walled carbon steel single shear bolted connections with end distance and plate thickness as main variables have been performed to investigate block shear fracture behavior and the influence of curling on ultimate strength. As a result, bolted connections with short end distance and thick plate failed by typical block shear fracture, whereas curling occurred in thin plate-connections with long end distance and resulted in the strength reduction.
In this study, thin-walled carbon steel double shear bolted connections with the same dimension as pre-tested single shear bolted connections were planned and tested in order to investigate the fracture mode and ultimate strength. Since curling was restrained by the thick plate on both sides, out of plane deformation was not observed in double shear specimens. Ultimate strengths of test results are compared with those of single shear bolted connections. Also, design strength and strength reduction are estimated quantitatively.

목차

Abstract
1. 서론
2. 기존 일면전단 접합부 실험체 개요 및 결과
3. 이면전단 접합부 실험 및 결과
4. 일면전단 볼트접합부와 이면전단 볼트접합부의 거동 비교
5. 결론
감사의 글
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2010-540-003290779