지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2012.6
- 수록면
- 421 - 424 (4page)
이용수
초록· 키워드
오류제보하기
Carbon Fiber reinforced composite material can be designed for the optimized performances of structural member that have achieve appropriate mechanical properties with cross-sectional shape, fiber direction, stacking sequence and thickness. So there are needed extensive databases each optimal design of CFRP structural member by impact through the preparation of different shape, interface number, thickness and stacking angle. When pressure is applied to structural member, compression, bending and torsion is shown on the corresponding member. For the effective utilization of fiber reinforced composite material as main structural member, optimized design technology should be established to maximize mechanical properties for compression, bending and torsion.
In this paper, CFRP prepreg sheet with different stacking angle is manufactured in CFRP and hybird(Al+CFRP) with circular cross-section. Strength and stiffness is gotten respectively by flexure test. CFRP structure and hybrid structure can be compared with each other. The best design guideline can be analyzed by use of this study result.
In this paper, CFRP prepreg sheet with different stacking angle is manufactured in CFRP and hybird(Al+CFRP) with circular cross-section. Strength and stiffness is gotten respectively by flexure test. CFRP structure and hybrid structure can be compared with each other. The best design guideline can be analyzed by use of this study result.
목차
Abstract
1. 서론
2. 실험 방법
3. 실험 결과
4. 결론
후기
참고문헌
참고문헌 (15)
참고문헌 신청
1. [학술지(정기간행물)] - Kim, J. H / 2009 / Characteristics of CFRP Structure of Bending Strength and Rigidity According to Stacking Orientation Angle / AJSE 34 (1) : 21 ~ 27
2. [학술대회논문] - Kim, J. H / 2007 / Characteristics of Bending according to Stacking Sequence for Hybrid Circular Members / International Conference on Smart Materials and Nanotechnology in Engineering 6423 : 642345 ~
4. [학술지(정기간행물)] - Sim, J. K / 1993 / Impact Damage and Residual Bending Strength of CFRP Composite Laminates Involved Difference of Fiber Stacking Orientation and Metrics / Journal of KSPE 10 (4) : 152 ~ 162
5. [학술지(정기간행물)] - Lee, K. S / 2006 / Influence of Stacking Conditions on the Collapse Characteristics of CFRP Side Member / KSMTE Spring Conference 20 (5) : 397 ~ 402
6. [학위논문] - Kim, Y. N / 2002 / Axial Collapse Characteristics of CFRP Composite Thin-wall Structures for Light Weight of Vehicle / 박사 / Chosun University
2. [학술대회논문] - Kim, J. H / 2007 / Characteristics of Bending according to Stacking Sequence for Hybrid Circular Members / International Conference on Smart Materials and Nanotechnology in Engineering 6423 : 642345 ~
4. [학술지(정기간행물)] - Sim, J. K / 1993 / Impact Damage and Residual Bending Strength of CFRP Composite Laminates Involved Difference of Fiber Stacking Orientation and Metrics / Journal of KSPE 10 (4) : 152 ~ 162
5. [학술지(정기간행물)] - Lee, K. S / 2006 / Influence of Stacking Conditions on the Collapse Characteristics of CFRP Side Member / KSMTE Spring Conference 20 (5) : 397 ~ 402
6. [학위논문] - Kim, Y. N / 2002 / Axial Collapse Characteristics of CFRP Composite Thin-wall Structures for Light Weight of Vehicle / 박사 / Chosun University
이 논문의 저자 정보
이 논문과 함께 이용한 논문
압전 소자 기반 구동 유닛의 히스테리시스 보상 강인 제어기 설계
김화수
,
김종원
한국생산제조학회지
2012
.04
반도체 약액용 자동제어 플라스틱 밸브의 내부 유동해석
이규훈
,
이응석
,
이민기
외 2명
한국생산제조학회지
2012
.04
언더필을 고려한 Sn-1.0Ag-0.5Cu 조성의 솔더볼을 갖는 플립칩에서의 보드레벨 낙하 및 진동해석
김성걸
,
임은모
한국생산제조학회지
2012
.04
고투과율 광학유리(SF57HHT) 초정밀절삭의 실험적 연구
김민재
,
이준기
,
황연
외 2명
한국생산제조학회지
2012
.04
3차원 레이저 다이렉트 패터닝 시스템 개발
백병만
,
이제훈
,
신동식
외 1명
한국생산제조학회지
2012
.02
최근 본 자료
댓글(0)
0