메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
강소영 (세종대학교) 조창상 (세종대학교) 김승진 (세종대학교) 강성민 (세종대학교) 윤현기 (세종대학교) 전의찬 (세종대학교)
저널정보
한국기후변화학회 한국기후변화학회지 Journal of Climate Change Research Vol.6 No.3
발행연도
2015.9
수록면
175 - 184 (10page)
DOI
10.15531/ksccr.2015.6.3.175

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (2)

초록· 키워드

오류제보하기
In this study GC and PAS were used to calculate N₂O concentration of exhaust gas from Wood Chip combustion system. Fuel supplied to the incinerator was collected and analyzed and then the analysis result was used to calculate N₂O emissions. Tier 3 and Tier 4 Method were used to calculate the N₂O emissions. Plant"s Specific emission factor of N₂O by Tier 3 Method was 0.35 kg/TJ, while default emission factor of Wood?Wood Waste proposed by 2006 IPCC G/L was 4 kg/TJ. So the N₂O emission factor of this study was 3.65 kg/TJ lower compared to the IPCC G/L. The total emissions calculated by Plant"s specific emission factor was 4.22 kg during the measuring period, but by Tier 4 Method it was 7.88 kg. This difference in emissions was caused by the difference of continuous measuring and intermittent sampling. It would be necessary to apply continuous measuring to calculate emissions of Non-CO₂ gas whose the density distribution is relatively high. However currently, according to the target management guideline of greenhouse gas and energy, the continuous measuring method to calculate greenhouse gas emission is applied only to CO₂. Therefore for reliable greenhouse gas emission calculation it would be necessary to apply continuous measuring to calculate Non-CO₂ gas emission.

목차

ABSTRACT
1. 서론
2. 연구 방법
3. 연구 결과
4. 결론
REFERENCES

참고문헌 (15)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2016-453-001887150