메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
김영환 (한국원자력연구원) 이재원 (한국원자력연구원) 박근일 (한국원자력연구원)
저널정보
한국소성·가공학회 한국소성가공학회 학술대회 논문집 2014년도 한국소성가공학회 추계학술대회 논문집
발행연도
2014.10
수록면
346 - 349 (4page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (21)

초록· 키워드

오류제보하기
The wet process shearer has problems such as mass oil waste when the simulated spent fuel rods are sheared by tools, and it has low product ability because of change time of oil and tools. Also, when spent fuel rod is sheared by shearer, round shape is crushed. In order to solve these problems, simulated spent fuel rods(rod-cuts: Zry-4 tube + Al pellet) were manufactured and shearing test was conducted. Also, we selected a method of liquefied nitrogen with a roller blade for a fine circular type, and consisted of shearing module, rotation module and cooling module. We selected a nozzle spray method of cryogenic coolant on the pipe for shearing test. In the results, the problems of wet process shearer such as oil contamination and low product ability were solved by the nozzle spray method of cryogenic coolant. Also, a circular shape of shearing section was maintained by the cutting blades, nozzle splaying and lever. In the case of high speed shearing, tool life was largely affected by tool cooling than pipe cooling, if low speed of shearing, highly effective by it.

목차

Abstract
1. 서론
2. 기존 습식 전단장치
3. 초저온 건식 전단장치
4. 전단시험
5. 전단시험 결과
6. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

이 논문의 저자 정보

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-551-000833831