메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
장병화 (한국생산기술연구원) 김대해 (한국생산기술연구원) 김용모 (한양대학교) 권민준 (한국생산기술연구원) 이창엽 (한국생산기술연구원)
저널정보
한국에너지기후변화학회 에너지기후변화학회지 에너지기후변화학회지 Vol.11 No.2
발행연도
2016.12
수록면
91 - 99 (9page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (3)

초록· 키워드

오류제보하기
An experimental study has been performed to examine nitrogen oxides (NOx), carbon monoxide (CO) emission characteristics of a burner used for the heating medium boiler. Multi small flames those are heavily weighted fuel lean/rich region were formed on the developed burner. It can reduce emission concentration of pollutant such as NOx because of low flame temperature and equivalence ratio control. In the experimental condition, excess ratio of overall combustion zone was 1.21 for the clear combustion and it was fixed during the experiment. However, each small flames were classified into two types, fuel lean flame (excess air ratio was 0.7) and fuel rich flame (excess air ratio was 1.56). In this study, combustion air (30 ℃, 80 ℃), nozzle type (single nozzle, 45° nozzle, radial nozzle) and nozzle penetration length (-10 ㎜, +16 ㎜, 226 ㎜) were selected as a experimental variables and experiments were focused to investigate the emission characteristics of the developed burner. As a result, NOx emission was decreased to 29 ppm at flue gas O₂ 4% condition when the temperature of combustion air was 30°C and it was 35 ppm when the temperature of combustion air was 80℃.

목차

ABSTRACT
1. 서론
2. 이론적 고찰
3. 실험 장치 및 조건 선정
4. 실험결과
5. 결론
References

참고문헌 (5)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2017-453-001997144