지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2016.12
- 수록면
- 470 - 476 (7page)
이용수
초록· 키워드
오류제보하기
Many studies have been performed on hybrid fiber reinforced concrete for years, which is to improve some of the weak material properties of concrete. Studies on characteristics of hybrid fiber reinforced concrete using amorphous steel fiber and polyamide fiber, however, yet remain to be done. The purpose of this experimental research is to evaluate the workability and mechanical properties of hybrid fiber reinforced concrete using amorphous steel fiber and polyamide fiber. For this purpose, the hybrid fiber reinforced concrete containing amorphous steel fiber(ASF) and polyamide fiber(PAF) were made according to their total volume fraction of 0.5 % for water-binder ratio of 33 %, and then the mechanical properties such as the compressive strength, direct tensile strength, flexural strength, and flexural toughness of those were estimated. It was observed from the test results that the compressive strength was slightly decreased with increasing ASF and decreasing PAF and the effect of fiber combination on the flexural strength was not much but the flexural toughness was relatively largely increased with decreasing ASF and increasing PAF.
목차
1. INTRODUCTION
2. EXPERIMENTAL WORK
3. RESULTS AND DISCUSSION
4. CONCLUSIONS
References
참고문헌 (23)
참고문헌 신청
[기타자료] - / 2008 / ACI Committee 318, Building Code Requirement for Structural Concrete and Commentary(ACI 318-08) / American Concrete Institute : 430 ~
[기타자료] - / 1999 / ACI Committee 544, Design Consideration for Steel Fiber Reinforced Concrete / American Concrete Institute
[기타자료] - / 2013 / ASTM C 1609, Standard Test Method for Flexural Performance of Fiber-reinforced Concrete-using Beam with Third-point Loading / American Society for Testing Materials
[학술지(정기간행물)] - Cho, C. G. / 2011 / Evaluation of shear strength of amorphous steel fiber-reinforced cementitious mortar / Journal of Architecture Institute of Korea 31 (2) : 329 ~ 330
[학술지(정기간행물)] - Choi, K. K. / 2015 / Restrained shrinkage cracking of amorphous metallic fibre-reinforced concrete / Proceedings of the ICE-Structures and Buildings 168 (12) : 902 ~ 914
[기타자료] - / 1999 / ACI Committee 544, Design Consideration for Steel Fiber Reinforced Concrete / American Concrete Institute
[기타자료] - / 2013 / ASTM C 1609, Standard Test Method for Flexural Performance of Fiber-reinforced Concrete-using Beam with Third-point Loading / American Society for Testing Materials
[학술지(정기간행물)] - Cho, C. G. / 2011 / Evaluation of shear strength of amorphous steel fiber-reinforced cementitious mortar / Journal of Architecture Institute of Korea 31 (2) : 329 ~ 330
[학술지(정기간행물)] - Choi, K. K. / 2015 / Restrained shrinkage cracking of amorphous metallic fibre-reinforced concrete / Proceedings of the ICE-Structures and Buildings 168 (12) : 902 ~ 914
함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
비정질 강섬유와 유기섬유를 이용한 하이브리드 섬유보강 콘크리트의 작업성 및 강도 특성
복합신소재구조학회논문집
2015 .01
-
Experimental investigating the properties of fiber reinforced concrete by combining different fibers
Computers and Concrete, An International Journal
2020 .01
-
Corrosion effects on mechanical behavior of steel fiber reinforced concrete, including fibers from recycled tires
Computers and Concrete, An International Journal
2020 .01
-
Interaction of magnetic water and polypropylene fiber on fresh and hardened properties of concrete
Steel and Composite Structures, An International Journal
2021 .01
-
Experimental investigation on self-compacting concrete reinforced with steel fibers
Structural engineering and mechanics : An international journal
2016 .01
-
Experimental Toughness and Durability Evaluation of FRC Composite Reinforced with Steel–Polyester Fiber Combination
International Journal of Concrete Structures and Materials
2023 .09
-
Experimental investigation on self-compacting concrete reinforced with steel fibers
Structural Engineering and Mechanics, An Int＇l Journal
2016 .01
-
Residual properties of high-strength fiber reinforced concrete after exposure to high temperatures
Computers and Concrete, An International Journal
2019 .01
-
Mechanical Properties of Lightweight Aggregate Concrete Reinforced with Various Steel Fibers
International Journal of Concrete Structures and Materials
2022 .11
-
하이브리드 섬유를 혼입한 고강도 모르타르의 역학적 특성에 관한 연구
대한건축학회 논문집 - 구조계
2016 .07
-
Resistance of concrete made of fibers in weight lifting slabs against impact in sports training
Structural Engineering and Mechanics, An Int＇l Journal
2023 .05
-
EVALUATION OF SEISMIC SHEAR CAPACITY OF PRESTRESSED CONCRETE CONTAINMENT VESSELS WITH FIBER REINFORCEMENT
Nuclear Engineering and Technology
2015 .01
-
Steel Fiber Reinforced Concrete: Behavior, Modelling and Design
대한토목학회지
2021 .02
-
Local bond-slip behavior of medium and high strength fiber reinforced concrete after exposure to high temperatures
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Effect of steel fiber volume fraction and aspect ratio type on the mechanical properties of SIFCON-based HPFRCC
Structural Engineering and Mechanics, An Int＇l Journal
2018 .01
-
Local bond-slip behavior of medium and high strength fiber reinforced concrete after exposure to high temperatures
Structural engineering and mechanics : An international journal
2018 .01
-
Effect of waste cement bag fibers on the mechanical strength of concrete
Advances in materials research : AMR
2019 .01
-
강섬유보강 콘크리트의 휨인장강도 특성을 고려한 휨강성 평가
대한건축학회 논문집 - 구조계
2019 .08
-
유리섬유 코팅사와 탄소섬유를 이용한 일방향 탄소섬유시트 제조 공정이 콘크리트 보강에 미치는 영향
한국염색가공학회지
2022 .09
-
Evaluation on Protection Performance and On-Site Applicability of Hybrid Fiber-Reinforced Concrete
International Journal of Concrete Structures and Materials
2019 .03
이 논문의 저자 정보
최근 본 자료
댓글(0)
0
UCI(KEPA) : I410-ECN-0101-2017-531-002111518