본 연구는 고용량 인버터 등의 열 발생 환경에서 히트싱크의 방열성능을 극대화하기 위한 파라미터 연구의 일환으로 히트싱크 베이스 두께 변화에 대한 방열성능 변화를 조사하였다. 베이스 두께가 각각 5, 9.5 및 14 mm인 히트싱크의 방열 성능을 히트싱크 베이스의 윗면 중앙 온도, 히트싱크를 통한 방열량 및 열원부의 온도 등의 세 가지 지표의 비교를 통하여 고찰하였다. 실험연구와 전산유체역학 프로그램을 이용한 해석연구를 병행하여 베이스 두께 변화에 따른 각 방열 성능 지표 에 변화가 있음을 확인하였다. 베이스의 윗면 중앙 온도와 방열율은 베이스의 두께가 얇을수록 향상되는 효과를 보였고, 베이 스 열원부의 온도는 베이스의 두께가 두꺼울수록 낮아지는 경향을 보였다. 성능 지표의 비교 고찰을 통해 연구에 사용된 세 히트싱크 내에서는 베이스의 두께가 9.5 mm인 히트싱크에서 최적점이 나타났다. 따라서 제한적이지만 본 연구결과 내에 서는 9.5 mm 두께의 베이스를 가지는 히트싱크가 최적의 방열 성능을 보이는 것으로 판단되었다.
In this study, to maximize the heat release from the heat generating environment, such as a high-capacity inverter, the heat release performance of the extruded-type heat sinks with the variation of the base thickness were investigated using the experimental and numerical methods. The base thickness was varied from 5 to 14 mm. The heat release was characterized by the amount of heat released through the heat sink, the surface temperature of heat sink base between the heat sources, and temperature of heat sources. The surface temperatures between heat sources and the amounts of heat release were improved more as the base thickness was decreased. In contrast, the temperatures of the heat sources decreased with increasing base thickness. Based on the case study of these heat sinks, it is believed that a heat sink with a 9.5mm-thick base was optimized for the heat release.