메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
백원근 (한밭대학교) 허재혁 (한국에너지기술연구원) 윤린 (한밭대학교)
저널정보
대한설비공학회 설비공학논문집 설비공학논문집 제30권 제5호
발행연도
2018.5
수록면
205 - 210 (6page)
DOI
10.6110/KJACR.2018.30.5.205

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
Two plate type heat exchangers were tested. One was under fouling conditions from seawater and the other was under clean condition. Overall heat coefficient, heat transfer coefficient, fouling thermal resistance, and pressure drop of the heat exchangers were obtained. Effects of fouling on plate type heat exchangers were then investigated. The test heat exchanger, a differential pressure transducer, and two mass flow meters were installed. The working fluid used in the experiment was water on the seawater side and brine on the other side of the heat exchanger. Operational temperatures for seawater side were 10℃, 20℃, and 30℃. The brine side temperatures were 5℃, 15℃, and 25℃. Operational flow rates at both sides were 20-30 lpm. The overall heat transfer coefficient for seawater side was increased by an average of 21% in clean condition without fouling. Pressure drop was less than 2 kPa with temperature variation. However, pressure drop for seawater side was increased four times under fouling conditions.

목차

Abstract
1. 서론
2. 실험방법 및 실험장치
3. 실험결과
4. 결론
References

참고문헌 (8)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0

UCI(KEPA) : I410-ECN-0101-2018-553-002077382