메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술저널
저자정보
김승준 (과학기술연합대학원대학교) 서준원 (한국생산기술연구원) 최영석 (과학기술연합대학원대학교) 박준관 (한국수력원자력) 박노현 (금성이앤씨) 김진혁 (과학기술연합대학원대학교)
저널정보
한국유체기계학회 한국유체기계학회 논문집 한국유체기계학회 논문집 제22권 제5호(통권 제116호)
발행연도
2019.10
수록면
5 - 12 (8page)
DOI
10.5293/kfma.2019.22.5.005

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

이 논문의 연구 히스토리 (6)

초록· 키워드

오류제보하기
The precessional vortex is usually developed in the draft tube during the operations at the turbine mode of a pump turbine with low flow-rate conditions as the off-design conditions. This vortex causes pressure fluctuation and instability for the operation of the pump turbine system, which results in system failure. The development of the precessional vortex is related to the strength of the swirl at the runner outlet with low flow-rate conditions. In this study, the definition of the swirl number was used to investigate the influence of the swirl intensity on the precessional vortex characteristic at the draft tube. Accordingly, three-dimensional steady- and unsteady-state Reynolds-averaged Navier-Stokes calculations were performed with a shear stress transport turbulence model and a two-phase flow analysis to observe the internal flow and unsteady pressure characteristics according to the precessional vortex. The precessional vortex was well captured in the draft tube cone within the specific range of swirl numbers. This vortex region showed the complicated internal flow and affected the higher unsteady pressure characteristics on the wall of the draft tube cone.

목차

ABSTRACT
1. 서론
2. 펌프터빈 제원(터빈 모드)
3. 수치해석방법
4. 결과 및 검토
5. 결론
References

참고문헌 (16)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0