메뉴 건너뛰기
.. 내서재 .. 알림
소속 기관/학교 인증
인증하면 논문, 학술자료 등을  무료로 열람할 수 있어요.
한국대학교, 누리자동차, 시립도서관 등 나의 기관을 확인해보세요
(국내 대학 90% 이상 구독 중)
로그인 회원가입 고객센터 ENG
주제분류

추천
검색
질문

논문 기본 정보

자료유형
학술대회자료
저자정보
배장현 (한국항공대학교) 조영탁 (한국항공대학교) 최윤덕 (한국항공대학교) 부준홍 (한국항공대학교) 한창우 (효성) 정승붕 (효성)
저널정보
대한기계학회 대한기계학회 춘추학술대회 대한기계학회 2019년 학술대회
발행연도
2019.11
수록면
136 - 140 (5page)

이용수

표지
📌
연구주제
📖
연구배경
🔬
연구방법
🏆
연구결과
AI에게 요청하기
추천
검색
질문

초록· 키워드

오류제보하기
A series of experiments was conducted to investigate the operational characteristics of a loop-type thermosyphon for cooling of a power transistor module under high heat flux. The flat evaporator was made of copper and the heating area was 150 ㎜ × 190 ㎜, and the working fluid was water. The transport lines were made of polyethylene tubes and the inner diameters of the vapor and liquid lines were 16.0 ㎜ and 12.4 ㎜, respectively. The condenser was a fin-tube heat exchanger cooled by forced air convection. The condenser was separated from the evaporator by 1.3 m horizontally, and positioned 0.6 m higher to utilize the gravity for liquid return. The thermal performance varied greatly with the working fluid fill charge. For a fill charge ratio of 60%, the loop thermosyphon transported a maximum heat load of 3.3 ㎾ maintaining the evaporator temperature below 100℃, with air cooling at room temperature.

목차

Abstract
1. 서론
2. 실험장치 및 방법
3. 실험결과 및 토론
4. 결론
참고문헌

참고문헌 (0)

참고문헌 신청

함께 읽어보면 좋을 논문

논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!

이 논문의 저자 정보

이 논문과 함께 이용한 논문

최근 본 자료

전체보기

댓글(0)

0