개인구독
소속 기관이 없으신 경우, 개인 정기구독을 하시면 저렴하게
논문을 무제한 열람 이용할 수 있어요.
지원사업
학술연구/단체지원/교육 등 연구자 활동을 지속하도록 DBpia가 지원하고 있어요.
커뮤니티
연구자들이 자신의 연구와 전문성을 널리 알리고, 새로운 협력의 기회를 만들 수 있는 네트워킹 공간이에요.
논문 기본 정보
- 자료유형
- 학술저널
- 저자정보
- 발행연도
- 2022.10
- 수록면
- 2,381 - 2,394 (14page)
- DOI
- 10.1007/s12540-021-01139-8
이용수
초록· 키워드
오류제보하기
The dynamic recrystallization behavior of MP159 superalloy was investigated by performing hot compression tests in thedeformation temperature range of 920–1070 °C and strain rates of 0.01–10 s−1. Processing maps were established basedon flow curves, and the optimal hot processing region for MP159 alloy was identified at the deformation temperatures of940–980 °C and a strain rate of 0.01 s−1. The influence of the processing parameters (true strain, temperature and strainrate) on the microstructure evolution was studied. The volume fraction and grain size of recrystallized grains increased withincreasing strain rate and deformation temperature. Deformation twins that formed during hot deformation provided nucleationsites for dynamic recrystallization (DRX) and accelerated the DRX process. Discontinuous dynamic recrystallization(DDRX) was the dominant mechanism for the MP159 alloy at different deformation strains.
목차
등록된 정보가 없습니다.
참고문헌 (0)
참고문헌 신청함께 읽어보면 좋을 논문
논문 유사도에 따라 DBpia 가 추천하는 논문입니다. 함께 보면 좋을 연관 논문을 확인해보세요!
-
Hot Deformation Behavior and Recrystallization Mechanism in an As-Cast CoNi-Based Superalloy
Metals and Materials International
2022 .06
-
Effect of Initial Grain Size on the Dynamic Recrystallization of Hot Deformation for 3003 Aluminum Alloy
Metals and Materials International
2018 .01
-
High-Temperature Deformation Characteristics and Constitutive Model of an Ultrahigh Strength Steel
Metals and Materials International
2021 .10
-
Characterization of Hot Deformation Behavior and Processing Map of As?Cast H13 Hot Work Die Steel
Metals and Materials International
2021 .09
-
Evaluation of Dynamic Recrystallization Behaviors in Hot-Extruded AA5083 Through Hot Torsion Tests
Metals and Materials International
2017 .01
-
Coupling of Creep Deformation Mechanism Equations and Dynamic Recrystallization Kinetics for the Calculation of Processing Maps for Metallic Alloys
Metals and Materials International
2022 .03
-
Hot Deformation Behavior and Dynamic Recrystallization of a Medium Carbon Cr–Mo Steel for Class 16.8 Bolts
Metals and Materials International
2024 .01
-
Bimodal Phenomenon of the Stress?Strain Curve During Hot Compression of LA43M Mg?Li Alloy
Metals and Materials International
2021 .10
-
Deformation Mechanisms and Evolution of Second Phase Particles of Mg?Y?Nd?Gd?Zr Alloy During Plane Strain Compression
Metals and Materials International
2021 .11
-
Kinetics and Critical Conditions for Initiation of Dynamic Recrystallization During Hot Compression Deformation of AISI 321 Austenitic Stainless Steel
Metals and Materials International
2017 .01
-
Effect of Initial Microstructure on the Hot Deformation Behavior and Microstructure Evolution of Aluminum Alloy AA2060
Metals and Materials International
2022 .07
-
High Temperature Deformation Behavior of Spray-Formed and Subsequently Extruded Al-25Si Based alloy
Metals and Materials International
2016 .01
-
Modeling the Stress–Strain Curves and Dynamic Recrystallization of Nickel-Based A230 Alloy During Hot Deformation
Metals and Materials International
2022 .12
-
Evaluation of Hot Deformation and Dynamic Recrystallization Behaviors of Advanced Reduced-Activated Alloy (ARAA)
Metals and Materials International
2019 .01
-
변형률 속도에 따른 탄소강의 재결정 거동에 미치는 미량 합금 원소의 영향
한국재료학회지
2016 .01
-
변형속도에 따른 M1 마그네슘 합금의 고온변형 중 미세조직 형성 거동
열처리공학회지
2019 .01
-
Dislocation Density-Based Constitutive Model and Processing Map for T2 Copper During Isothermal and Time-Variant Deformation
Metals and Materials International
2022 .09
-
Effects of Zn Addition on Dynamic Recrystallization of High Strain Rate Rolled Al?Mg Sheets
Metals and Materials International
2022 .05
-
Hot Deformation Behavior and Dynamic Recrystallization Characteristics of 12Cr Ultra‑Super‑Critical Rotor Steel
Metals and Materials International
2019 .01
-
Zr–Nb Alloys and Its Hot Deformation Analysis Approaches
Metals and Materials International
2021 .01
이 논문의 저자 정보
최근 본 자료
댓글(0)
0